Thursday, February 23, 2017

Ironclad approved

Over the last few months (and by last few I mean September and onwards), I managed to get a fair bit of painting done.  That, of course, when I wasn't working, doing family things or otherwise engaged.

From the cabinet comes my warjacks from the journeyman league last summer, who contributed to my 'best painted' award at the end.

For starters, the Ironclad.  A heavy warjack with a quake hammer and open fist.  The colours are very traditional Cygnar, which is one of the things I was initially attracted to.

The blue is the Cygnar Blue base shaded first with Exile Blue then Exile and Umbral Umber.  Careful on the blue/brown mix as you want to avoid muddiness.  Then use Cygnar Blue Highlight in several layers (increasing the mix of highlight until you're pure Cygnar Blue Highlight) with a finish layer of Highlight mixed with a touch of Morrow White.

The gold is Rhulic Gold shaded by brown ink/Sanguine Base mix, then some Umbral Umber into that mix for a final wash.  Clean up with Rhulic Gold again and highlight with Shining Gold.

The steel portions are pig iron followed by a mix of Exile Blue and Armour Wash.  Add in some Umbral Umber for a final shade (not too much or it gets 'muddy' looking).  Highlight with Cold Steel and Quicksilver and done!

Normally I paint from the inside out, meaning the areas recessed farthest in get done first.  In this case it was eyes and boiler grille first, using Heartfire and Ember Orange to give it a warm, firey glow.  The arcane bits in blue on the hammer are Arcane Blue with blue ink and Meredius Blue, using Morrow White for the mix.  Dials and gauges on the back are Hammerfall Khaki  with Morrow White.

The Cygnus on the hull was tough as yellow is a pain in the butt sometimes.  However, keeping the paint fluid and gradually building up from Rucksack Ran to Cygnar Yellow and beyond with Menoth White Highlight made it stand out nicely.

The bases on all of them are a wet layer of Umbral Umber (somewhere between a wash and paint) to get into all the recesses.  This is followed by a heavy drybrush of Bootstrap Leather and a final touch of Rucksack Tan.  Two thin lines for front/back facing and a cleanup of the black rim and the base is done.

Here's his buddy the Charger, a lovely 'jack with a dual cannon and a hammer for squashing those who get too close.  Same techniques on this one, and I think he looks rather spiffy.  Ready to lay some smack on the enemies of Cygnar.

Finally, a group shot with Major Beth Maddox.

And two more photos of the warlock mini from the previous post.  A bit better photo quality.

Monday, February 20, 2017

Warlock model

Here's some photos of a warlock model I completed for Reaper Miniatures' quarterly contest. How it works is the previous winner selects a mini ($10 or less) and anyone who wants to paint one up and submit a single photo can do so.  Winners are judged by amount of likes and you get a prize for the online store.

Here's the one I did for the contest.  I went with something different, in that yellow is a colour I very seldom use.  Yes, I use it for trim and a bunch of other smaller things, but never to date as the largest part of a model.  Honestly, it turned out better than I thought.

The base coat is P3 Heartfire paint, with Bloodstone and Brown ink used in various amounts for shading, and highlighted with Cygnar Yellow and Menoth White.  The actual contest winner was a splendid model, well deserving of the honour.  As my my guy, well, my photo quality was crap, which I think hurt me. The colour is way too yellow-ish in the background.  Next time I will have to work on the lighting.  Nevertheless, it was fun to do and I anticipate doing more of these, if for no reason than to push my painting further.